PCB PRODUCTION

We provide semiconductor decapping and depackaging service

Optic Microscope imaging of the chip silicon wafer.

Unlock microcontroller and extract the program inside.

Unlock microcontroller and extract the program inside.

Make PCB prototype from the Schematics & BOM cloned from your sample

Mass production of PCB including compnents purchasing, SMT & pre-production sample making

Copy the schmatics (Gerber) and BOM (Bill Of Material).
Purchasing on-board components.
PC board manufacturing.
Assembly of 2 pre-production samples with all on-board components by hand.
After successful pre-production sample testing, proceed with mass production by machines.
The client have to be very clear that PCB production can never be done by us only, if the client do not have the sufficient means to test the pre-production samples, the job can not be completed.Because the samples were hand made from a scratch, human error sometimes is inevitable.

Test the functionalities after receiving the pre-production samples.
If the pre-production samples is not working correctly, the client need to find out the faulty reason.
Includes testing whether the PC board manufactured correctly.
Includes testing whether each component on the PCB is with the correct spec and correctly soldered.
Then give us a detailed report for us to do the change and make the pre-production samples again.